Tyrbo Make your game

Why AI-made 3D characters fall apart the moment they move

Tyrbo · · 6 min read

A 3D character that looks great standing still can come apart the second it takes a step. An arm ends in a spike, a cape swallows a leg, a robe balloons into a wedge. We kept seeing this in our own games, so in November 2026 we stopped arguing about it and measured it.

This is what we tried, what we got wrong, and what changed in Tyrbo because of it.

The test: 25 characters, three moves each

We built a bench of 25 characters and ran every one through the whole path a game would use: a design picture, a sculpted 3D model made from that picture, a skeleton fitted inside it, and then the stock moves played on it. Eight were chibis with big heads. Eight were the same ideas at grown-up proportions: a scout, a knight, a witch, a robot, a fox, a mage, an elf ranger, a detective. Then the awkward ones, on purpose. A bulky ogre with a tiny head, a dwarf, a skinny stick robot, a queen in a floor-length gown, a wizard in a robe, a guard holding a shield across the chest, a wolf, a pony and a baby dragon.

A character only counted as right if it passed three things:

  1. It looked good as a model, turned round on a turntable.
  2. It bound to its skeleton, meaning no edge of the mesh stretched past 15% of the character's height in the walk.
  3. Its frames, drawn from the walk, the sprint and the jump, read as clean to a judge looking for morphing. We took the middle of five looks, because one look alone wobbled.

The first count was bad

Five of 25. Twenty-two looked good, so the pictures and the sculpts were not the main problem. Only nine bound, and of those only five moved without melting.

That told us where to look. The art was fine. The trouble started the moment something tried to move it.

What was actually breaking

Most of it was boring, which is good news, because boring problems can be fixed.

The sculpts were cracked inside. We had asked the 3D model for a low polygon count up front, to save work later. At that setting it came back in hundreds of pieces, and our own cut then flattened it further. The scout's arms ended in spikes and the legs between its tunic and boots were simply gone. Asking for a much denser sculpt and rebuilding it ourselves as one closed surface fixed that for every body at once.

The characters were drawn in the wrong pose. Eighteen of the 25 design pictures showed the character side on with arms at its sides, because the game's default view was a side view. A skeleton wants arms out and legs apart. The wolf was even being asked to stand upright like a person. Now each kind of body has one camera and one pose for its design: a biped square on with arms out, a four-legged animal three-quarter on with its legs apart, a flier with its wings spread.

Skin was attached to the nearest bone in a straight line. So a hand took the hip it hung beside, and a backpack got glued to a collarbone. Measuring along the surface of the body instead of through the air means a pack follows the back it hangs off.

After those changes the bench went from 5 right to 15. Then a few more rounds, each fixing one thing for every body: tails treated as limbs of their own (the wolf went from tearing at 22% to 4%), skirts recognised as cloth hanging from the hips, characters sculpted empty-handed with their weapons added as separate items, and skirt bones so a gown follows the leg that pushes it. The count climbed to 16, then 18, then 19, then 22.

Then we caught ourselves fooling ourselves

Twenty-two looked like a great number. So we asked the frames judge again, 20 times per character, to see whether it would say the same thing twice.

It did not, for five of them. Seventeen sheets it cleared almost every time and three it called morphing almost every time. The other five sat right on the line: the scout and the mage were cleared on about half of their looks. The scout's sheet shows why. Its body is whole through the walk and the run, and the edge of its pack frays in two frames of the jump. Reasonable people would argue about that.

So 22 was our lucky end. The honest count was 20 or 21. We changed the scoring so a character on the line keeps being judged until the yes and no votes are clearly apart, and one that never settles is marked split instead of right. Under that rule the bench reads 20 right of 25, with 2 split. That is the number we stand behind.

What still breaks

Cloth that hangs between the legs is the hard case. The ogre's belly and loincloth sit over its thighs, and when the thighs part, that skin tears. A wizard's open robe lets the legs swing out through the front. A gown can hide shins that suddenly show. None of these are bound to morph in your game: the gate refuses them first, with a sentence saying what to change, usually "make the model with its limbs apart".

What this means for your game

If you are making a 3D game in Tyrbo, three practical things follow.

  • Grown-up proportions bind more easily than chibis. Since the rebuild most chibis bind too, but if your hero has a head two fifths of its height and long hair, expect a retry now and then.
  • Long robes and gowns are the risky outfit. If the character is the hero and you want it on screen all game, a coat that stops at the hips is the safer choice.
  • Hands start empty. A sword or a shield is made as its own item and put in the hand, so a weapon can change later without sculpting the hero again.

We also learned from a test game that a beautiful model is not enough on its own. In one build the sculpted scout was the best-looking thing on screen and read as part of the same world as the simpler slimes and trees. Its rig missed the walk gate by two points, 17% against 15%, so it bobbed instead of walking. That is why the choice is yours, not ours.

Where you choose it in Tyrbo

Every game has a Settings tab, and one of its rows is 3D models. Whichever you pick, the whole game is one kind, unless you ask for a piece the other way:

  • Builder picks lets the builder decide from the look: a detailed or realistic look is sculpted, a toy, blocky or flat look is low poly. When a new idea could go either way, you are asked first.
  • Sculpted sculpts every model from a picture: the hero and each character on a skeleton, and every prop, a few cents each. It is on every paid plan.
  • Low poly makes every model from simple shapes in your game's palette: quick, cheap and easy to change by asking.

Whichever you pick, every rigged character goes through the same gate as the bench before it reaches your game. If you are weighing a 3D look at all, the 3D game maker and low poly pages show what each style looks like in practice.

Questions people ask

Why do AI-generated 3D characters look fine but animate badly?

Because looking good and moving well are different tests. In our bench of 25 characters, 22 looked good from the start but only 5 moved cleanly. The problems were inside the model and in how its skin was tied to the skeleton, not in the picture it was made from.

Can Tyrbo make a 3D character for my game?

Yes. A 3D game can make every model low poly from simple parts, or sculpt every model from a picture, its characters and props alike, on every paid plan. You pick on the game’s Settings tab, under 3D models, or let the builder pick from the look.

What kind of character is hardest to animate?

Ones with cloth that hangs between or against the legs: long robes, gowns, a big belly over the thighs. When the legs move apart, that skin has to stretch or tear. Characters with limbs clearly apart, and hands empty until an item is added, bind most reliably.

What happens if a character fails the check?

It is sculpted once more from the same design and the better result is kept. If it still tears, it is refused with a sentence saying what to change, rather than put in your game to morph on screen.

Make the game this guide is about.

Make your game

Sign in to get the plan and its concept art. Both are free.